Radial Drilling Machine

The complete gamut of our products also comprise of radial drilling machines that are manufactured using superior quality raw material. Further, the radial drilling machines are also polished with top quality material to ensure high corrosion and abrasion resistance.

Specification - All Dimensions are in"mm"

Drilling Capacity in Steel	30
Tapping Capacity in Steel	M16
Morse taper in Spindle	MT3
Spindle traverse	150
No.of auto feed	3
Range of auto feed (mm/rev)	0.31-0.11-0.21
No. of Spindle Speeds	10
Range of Spindle speeds (rpm)	100-142-210-310-450/600-852-1260-1860-2700
Power of Spindle drive motor	1.5kw/2H.P 1440 rpm/415 VAC 3 Ph 50 Hz
Drilling radious Max/Min	770/580
Diameter of Pillar (matl :CI)	Ø 180
Distance between spindle nose & base Max./Min.	1065/500
Distance between base & round table	315
Dia of round table	Ø 360
Specification of Sq Table H X L X W	350 X 390 X 370
Base working surface	780 X 535
Power of lifting motor	0.75kw 1 HP 1440Rpm / 415 VAC 3Ph 50 Hz
Space occupied (length X width x height)	1350 X 680 X 2100
Net Weight	980 Kg

Optional Accessories ( at extra cost ) Drill chuck-Coolant pump-reduction sleeve-Machine vice - Sq Table


Main Features:

• The robust and streamlined construction enables it to withstand and absorb heavy cutting forces
• Drilling head is mounted over a study arm attached to the pillar
• Both the arm and the drilling head can be swivelled and clamped to any desired position on double column. The arm can be moved up and down by an elevating motor coupled to screw rod nut mechanism
• Arm can be positively locked in any desired position
• Over load clutch provided for safety mechanism disconnects elevating motion when arm is locked
• The extreme positions of the arm on the column are secured by over load clutch so automatically stop the elevating motion.
• Drive is transmitted from motor to spindle through five stepped V-groove pulley and V-belt
• Reduction gear unit mounted at the top of the machine provides ten wide range of spindle speeds
• Reduction gear unit is operated by means of a hand lever, provided within the easy reach of the operator
• The three range of auto feed can be selected by means of hand lever.
• Round table at the base, mounted over an arm which can be swlveled around to any desired position and can also be fixed in any one of the T-slots or can be removed so that the whole base can be used.

NOTE :

The above specifications are approximate only. Due to constant improvement, design the specification are subject to change without notice.

We provide redial drilling machine model RDH/A/330 that is widely valued by the clients. These are offered with Drilling Capacity in Steel of M16, Drilling Capacity in Steel of 2 mm, pillar diameter of Ø 150 (CI), and 10 spindle speeds. Offered with optional accessories such as coolant pump, machine vice, reduction sleeve, drill chuck, and square table, some of the specifications of these machines are as follows:

 

 

Morse taper in spindle	MT 3
Spindle travels	140
Piller front to spindle center min/max	350/810
Distance between base to spindle	730
Distance between table to spindle	470
Dia of round table	Ø 360
Square table specification (h x l x w)	350 x 390 x 370
Base over all size	1160 x 660
Base working surface	780 x 535
Range of spindle speeds (rpm)	100 - 142 - 210 - 310 - 450/600 - 852 - 126- - 1860 - 2700
Feeds by	Hand
Cycles power of lifting motor	0.75kw/1HP - 1440 rpm/415 Volt, AC 3 Phase. 50
Power of spindle drive motor	0.75kw/1HP - 1440 rpm/415 Volt, AC 3 Phase. 50
Cycles space occupied (h x w x l)	1350x660x1500
Net weight	650 kgs.

 

Moreover, these machines are also offered with the following speeds:

•    By Fixing 1HP 960 RPM Motor: -65-95-140-205-300/390-570-840-1230-1800 rpm.     
•    By fixing 2HP 720/1440 RPM motor: -50-71-105-155-225/300-426-630-930-1350 rpm -100-142-210-310-450/600-852-1260-1440-1860-2700 rpm.

Specification - All Dimensions are in"mm"

Drilling Capacity in Steel	25
Tapping Capacity in Steel	M16
Morse taper in Spindle	MT3
Spindle travels	140
Pillar diameter	Ø 150 (CI)
No. of Spindle Speeds	10
Range of Spindle Speeds (rpm)	100 - 142 - 210 - 310 - 450/600 - 852 - 126- - 1860 - 2700
Piller Front to Spindle center Min/Max	350/810
Distance between base to Spindle	730
Distance between round table to spindle	470
Dia of Round Table	Ø 360
Square Table Specification (H x L x w)	350 x 390 x 370
Base Over All Size	1160 x 660
Base Working Surface	780 x 535
Power of Spindle drive motor	0.75kw/1HP - 1440 rpm/415 Volt, AC 3 Phase. 50 HZ
Power of Lifting Motor	0.75kw/1HP - 1440 rpm/415 Volt, AC 3 Phase. 50 HZ
Space occupied (Length X Width X Height)	1350x660x1500
Net Weight	650 kg

Extra Equipments (at extra cost)

• Drill Chuck
• Light Fittings
• Machine Vice
• Coolant Pump
• Reduction Sleeves
• D.O.L Strater

Main Features:

• The robust and streamlined construction enables if to withstand and absorb heavy cutting forces.
• Drilling head is mounted over a sturdy arm attached to the pillar.
• Both the arm and the drilling head can be swiveled and clamped to any desired position. The arm can be raised by means of rack and pinion mechanism actuated by a hand lever, to any height with in its capacity.
• Drive is transmitted from motor to spindle through five stepped V-groove pulley and V-belt.
• Reduction gear unit mounted at the top of the machine head provides ten wide range of spindle speeds.
• Reduction gear unit is operated by means of a hand lever, provided within the easy reach of the operator.
• Circular table at the base mounted over an arm which can be swiveled around to any desired position and can be fixed in anyone of the T-slots or can be removed so that the whole base can be used.

NOTE :

The above specifications are approximate only. Due to constant improvement, design the specification are subject to change without notice.

We are engaged in offering radial drilling machines model BVR/325/GT that is widely appreciated by the clients. These are radial drilling machines offered with Drilling Capacity in Steel of 2 mm,

Drilling Capacity in Steel of M16, 10 spindle speeds, and pillar diameter of Ø 150 (CI). Offered with optional accessories drill chuck, coolant pump, reduction sleeve, machine vice, and square table. Following are some of the specifications of these radial drilling machines:

 

Morse taper in spindle	MT 3
Spindle travels	140
Piller front to spindle center min/max	350/810
Distance between base to spindle	730
Distance between table to spindle	470
Dia of round table	Ø 360
Square table specification (h x l x w)	350 x 390 x 370
Base over all size	1160 x 660
Base working surface	780 x 535
Range of spindle speeds (rpm)	100 - 142 - 210 - 310 - 450/600 - 852 - 126- - 1860 - 2700
Feeds by	Hand
Cycles power of lifting motor	0.75kw/1HP - 1440 rpm/415 Volt, AC 3 Phase. 50
Power of spindle drive motor	0.75kw/1HP - 1440 rpm/415 Volt, AC 3 Phase. 50
Cycles space occupied (h x w x l)	1350x660x1500
Net weight	650 kgs.

 

Moreover, these radial drilling machines are also offered with the following speeds:

•    By Fixing 1HP 960 RPM Motor: -65-95-140-205-300/390-570-840-1230-1800 rpm.     
•    By fixing 2HP 720/1440 RPM motor: -50-71-105-155-225/300-426-630-930-1350 rpm -100-142-210-310-450/600-852-1260-1440-1860-2700 rpm.

Our auto feed radial drilling machines are highly durable and functional. These are made from finest grade of materials and heat treated to gain optimal durability. We offer these auto feed radial drilling machines in strong packaging for their safe delivery to our clients.

Specification - All Dimensions are in"mm"

Drilling Capacity in Steel	25
Tapping Capacity in Steel	M16
Morse taper in Spindle	MT3
Spindle travels	140
Pillar diameter	Ø 150 (CI)
No. of Spindle Speeds	10
Range of Spindle Speeds (rpm)	100 - 142 - 210 - 310 - 450/600 - 852 - 126- - 1860 - 2700
Piller Front to Spindle center Min/Max	350/810
Distance between base to Spindle	730
Distance between round table to spindle	470
Dia of Round Table	Ø 360
Square Table Specification (H x L x w)	350 x 390 x 370
Base Over All Size	1160 x 660
Base Working Surface	780 x 535
Power of Spindle drive motor	0.75kw/1HP - 1440 rpm/415 Volt, AC 3 Phase. 50 HZ
Power of Lifting Motor	0.75kw/1HP - 1440 rpm/415 Volt, AC 3 Phase. 50 HZ
Space occupied (Length X Width X Height)	1350x660x1500
Net Weight	650 kg

Optional Accessories ( at extra cost ) Drill chuck-Coolant pump-reduction sleeve-Machine vice - Sq Table

NOTE :

The above specifications are approximate only. Due to constant improvement, design the specification are subject to change without notice.